Buy a complete Turnout track building kit and Save 10% on the cost of what you need to start building high quality, hand laid HO scale Turnouts right out of the box!

Build your own high quality, NMRA compliant, HO scale, Turnouts for $15.08* per switch and get results that will easily out-perform any store bought track! No special skills are needed and results are guaranteed.

This kit does not include rail. If you need rail you can order the same kit with enough rail to build 5 switches.

Need to build more than 5 Turnouts? Click on the Related Items tab to order extra supplies.

* The $15.08 per Turnout includes QuickSticks laser cut ties, PC board ties and rail with no discounts. The cost per switch does not include tools.

---

Click on the links below to learn more about how Fast Tracks tools and supplies can help you build better railroads

The complete Assembly Fixture Builders Guide
How the Fast Tracks PointForm tool makes it easy to construct frog & switch points
Using the StockAid tool to file the stock rail
Soldering trackwork - easier than you think!
Have A Question? Visit Our Online Discussion Forum!

Each kit comes complete with everything you need including:

• 1 - Fast Tracks Assembly Fixture for HO Scale #9 Turnouts using Micro Engineering 100 rail (AF-HO-T-9-ME100 - $98.95)
• 1 - #9 PointForm filing jig for frog and switch points (PF-9-M - $40.46)
• 1 - Bundle PC Board Ties for Turnouts - enough to build 10 Turnouts (PB-HO-S - $10.80)
• 1 - 15ft Coil .015 inch (46 cm) small diameter solder (SP-0003 - $3.59)
• 1 - Tube Pliobond contact cement with 2 micro dispensing tips (SP-0001 - $5.03)
• 5 - #9 QuickSticks laser cut wood tie lattices - enough to build 5 Turnouts (LT-HO-T-9 - $40.77)
• CD with a complete set of illustrated Users\' Guides, videos and printable tie templates
• Our satisfaction guarantee!

Default Turnout Length	15.4" (391 mm)	This is the length of the turnout on the QuickSticks. Measured from end tie to end tie.
Minimum Turnout Length	11.8" (300 mm)	This is the shortest possible turnout length. Measured from the end PC board tie to end PC board tie.
Diverging Route Angle	6.34 (Decimal) 6° / 20' / 24" (D/M/S) 1:9 (Ratio)	Decimal - The frog angle in decimal degrees. D/M/S - The frog angle in Degrees / Minutes / Seconds Ratio - The frog angle expressed as a ratio.
Diverging Route Radius	91"	The minimum radius in a straight turnout.
Tie Spacing (Prototype)	20" (508 mm)	The distance between each tie.
Tie Size (Model)	L - 1.17" (29.7 mm) W - 0.1" (2.6 mm) H - 0.08" (2 mm)	The actual size of the tie.
Tie Size (Prototype)	L - 8.5' (2591 mm) W - 9" (229 mm) H - 7" (178 mm)	The original tie size that the model was based on.
Secondary Frog Angle	NA	The second frog angle for any switch that has two frogs. (Slip switches, 3-ways, dual gauge switches, etc)
Track Gauge	0.66" (16.8 mm)	The distance between the stock rails.
Track Spacing	NA	The center to center distance of the parallel track. (Only applies to double crossovers)
Substitution Radius	148"	The approximate radius that a straight turnout can be inserted into.
Fixture Size	L - 14" W - 6" H - 0.25"
Fixture Weight	1.2 (Lbs)
Fixture Material	6061 Aluminum

This is the first and last videos in our Using Fast Tracks Assembly Fixtures video series. To watch the complete series of videos, visit our video library.

Building Trackwork With Fast Tracks

Completing Trackwork With QuickSticks

Having trouble playing the videos? If the video starts and stops a lot, try pausing the video for a minute or two by clicking the pause button and then starting it again. This will \'buffer\' the video to your computer for smoother playback. If the video will not play at all, be sure you have the latest Flash player from Adobe.