Track Template Library
Switch Building Kits
QuickSticks Laser Ties
Track Assembly Fixtures
BullFrog Turnout Control
PC Board & Wood Ties
TieBreaker PCB Cutting Tool
Point Building Tools
Tools & Supplies
Rail & Accessories
Tie Rack Tie Jigs
Printable Track Templates
CNJ Bronx Terminal Painting
Hong Kong Dollars
New Zealand Dollar
South African Rand
South Korean Won
HOn3 Scale, #7 Wye TwistTies Kit for Micro Engineering 70 Rail
Select Product Photo or Video:
Buy a complete TwistTie wye kit and get what you need to build 6 HOn3 scale, straight or curved wyes!
Each kit includes all of the tools and supplies that you need to start building NMRA compliant, all wood tie wyes. Get results that will easily out-perform store bought track with no special skills and guaranteed results.
Built To Order
Part No :
You will always get better and faster results with less effort using our
. However if you only need to build a small number of curved turnouts of any radius, or if you prefer all wood tie construction, then TwistTies may be a better option for you.
Need to build more than 6 switches? Check below for a list of the items that are included in this kit.
This kit comes complete with everything you need including:
6 - HOn3 scale, #7, wye TwistTies (TW-HOn3-Y-7)
1 - Large (#7, #8 & #9) Frog Helper tool (FH-ME70-83-L)
1 - HOn3 scale, #7 PointForm tool (PF-7-M)
1 - Fret CopperHead PC Board Ties for the throwbar (CH-HO-N)
1 - StopGaps rail gap fillers (SG)
1 - Package Micro Engineering small spikes (30-106)
1 - 15ft Coil .015 small diameter solder (SP-0003)
20 - 18 inch (46 cm) long pieces Micro Engineering code 70 rail (17-070-C)
To reduce shipping costs, the rail is cut into 18 inch (46 cm) lengths. The cut lengths will be long enough for the longest piece of rail required to construct the Wye.
Click on the links below to learn more about how Fast Tracks tools and supplies can help you build better railroads
TwistTies Builders Guide
How the Fast Tracks PointForm Tool Makes It Easy To Construct Frog & Switch Points
Using the StockAid tool to file the stock rail
Have A Question? Visit Our Online Discussion Forum!
10.7" (272 mm)
This is the length of the turnout measured from end tie to end tie.
* Diverging Route Angle
8° / 7' / 48"
Decimal - The frog angle in decimal degrees.
D/M/S - The frog angle in Degrees / Minutes / Seconds
Ratio - The frog angle expressed as a ratio.
* Diverging Route Radius
The minimum radius in a straight turnout.
* Only valid for straight turnouts
Tie Spacing (Prototype)
22" (559 mm)
The distance between each tie.
Tie Size (Model)
- 0.97" (24.5 mm)
- 0.08" (2.1 mm)
- 0.06" (1.6 mm)
The actual size of the tie.
Tie Size (Prototype)
7' (2 m)
- 7" (178 mm)
- 5" (127 mm)
The original tie size that the model was based on.
Secondary Frog Angle
The second frog angle for any switch that has two frogs. (Slip switches, 3-ways, dual gauge switches, etc)
0.42" (10.7 mm)
The distance between the stock rails.
The center to center distance of the parallel track. (Only applies to double crossovers)
* Substitution Radius
The approximate radius that a straight turnout can be inserted into.
* Only valid for straight turnouts.
3 Ply Baltic Birch
Building Trackwork With TwistTies
Having trouble playing the video?
If the video starts and stops a lot, try pausing the video for a minute or two by clicking the pause button and then starting it again. This will buffer the video to your computer for smoother playback. If the video will not play at all, be sure you have the latest Flash player from Adobe.
Frog Helper for 7 8 9 and ME Code 70 83 Rail
7 PointForm Filing Jig for Code 70 83 100 Rail
Micro Engineering Spikes
Curvable Wood Ties HOn3 Scale 7 Wyes
StopGap Rail Gap Fillers
Hex Frog Juicer - Automatic Frog Polarity Switcher
CopperHead HO Scale Narrow Gauge PC Board Ties
18in Micro Engineering Code 70 Non-Weathered Rail
Small Diameter Solder-15ft Roll
Share your knowledge of this product with other customers...
Be the first to write a review
© 2011 Fast Tracks Hobbyworks Inc.
Terms & Conditions
(Your shopping cart is empty)