Fast Tracks PC Board ties are stamped rather than sheared, producing a perfectly flat tie with no twisting or warping. The copper cladding is applied to both sides of the tie with double isolation gaps cut close to the rail, making it easy to disguise the gap during final finishing. The ties are pre-cut to length meaning you can use them right out of the bag with no further preparation.

• 1/16" thick - matches HOn30 scale wood crossties
• Pre-Gapped - eliminates the need to hand file the gaps into the ties
• Double Gapped - with gaps cut close to the rail to help disguise them
• Cut to length - no further preparation required
• Stamped, not sheared - perfectly flat with no twisting

HOn30 scale Crossties are 7 scale inches wide and 6 scale feet long and are 100% compatible with Fast Tracks straight and curved track assembly fixtures or hand constructed trackwork.

Ties are sold in bags of 200 pieces.

Gapped PC Board Ties

Having trouble playing the video? If the video starts and stops a lot, try pausing the video for a minute or two by clicking the pause button and then starting it again. This will buffer the video to your computer for smoother playback. If the video will not play at all, be sure you have the latest Flash player from Adobe.