Now anyone can build inexpensive, hand laid trackwork that:

• Looks Great! - With realistic looking trackwork on wood ties
• Is Easy To Build - With results that rival even the most experienced modelers
• Performs Perfectly - Completely eliminates derailments
• Can Be Built Quickly - Build a fully complete Turnout in less than an hour!
• Lets You Work in Comfort - Build ready-to-run trackwork right at your workbench

QuickSticks are cut from Baltic Birch plywood custom sawn in Finland specifically for Fast Tracks. The wood grain runs perpendicular to the rails. The ties are 7" (178 mm) thick and 9" (229 mm) wide (scale) and will match all popular commercially available wood ties, including wood ties available from Fast Tracks.

N-NN3 dual gauge, #6 QuickSticks are 100% compatible with Turnouts constructed with the Fast Tracks N dual gauge Turnout assembly fixture.

This product is part of our Craftsman Series of tools that are designed for modelers who want to go that 'extra mile' to produce outstanding trackwork. You should be prepared to spend extra time and effort to learn how to use this product. Click here to learn more about our Craftsman Series of tools.

---

Click on the links below to learn more about using QuickSticks and other Fast Tracks tools

QuickSticks Builders Guide
Building Turnouts Using Fast Tracks Assembly Fixtures
Have A Question? Visit Our Online Discussion Forum

Default Turnout Length	6.3" (159 mm)	This is the length of the turnout on the QuickSticks. Measured from end tie to end tie.
Minimum Turnout Length	4.3" (109 mm)	This is the shortest possible turnout length. Measured from the end PC board tie to end PC board tie.
Diverging Route Angle	9.46 (Decimal) 9° / 27' / 36" (D/M/S) 1:6 (Ratio)	Decimal - The frog angle in decimal degrees. D/M/S - The frog angle in Degrees / Minutes / Seconds Ratio - The frog angle expressed as a ratio.
Diverging Route Radius	23"	The minimum radius in a straight turnout.
Tie Spacing (Prototype)	20" (508 mm)	The distance between each tie.
Tie Size (Model)	L - 0.64" (16.2 mm) W - 0.06" (1.4 mm) H - 0.04" (1 mm)	The actual size of the tie.
Tie Size (Prototype)	L - 8.5' (2.6 m) W - 9" (229 mm) H - 7" (178 mm)	The original tie size that the model was based on.
Secondary Frog Angle	NA	The second frog angle for any switch that has two frogs. (Slip switches, 3-ways, dual gauge switches, etc)
Track Gauge	0.36" (9.1 mm)	The distance between the stock rails.
Track Spacing	NA	The center to center distance of the parallel track. (Only applies to double crossovers)
Substitution Radius	NA	The approximate radius that a straight turnout can be inserted into.
QuickStick Latttice Size	L - 7" W - 3.5" H - 0.1"
QuickStick Weight	0.06 (Lbs)
QuickStick Material	3 Ply Baltic Birch

Using QuickSticks

Having trouble playing the video? If the video starts and stops a lot, try pausing the video for a minute or two by clicking the pause button and then starting it again. This will buffer the video to your computer for smoother playback. If the video will not play at all, be sure you have the latest Flash player from Adobe.