• 0.032" (1/32") — This size bit is used to drill a precise pilot hole, enabling you to accurately start the hole in the center of the throwbar before drilling the final hole. If you are using the stock throwbar wire size with a Tortoise switch machine, this size drill will produce the proper sized hole.
• 0.040" (No. 60) — If a bit more torque is required to move the switchpoints, it is advisable to use .039" wire in a slow motion switch machine such as a Tortoise. This bit will produce the proper size hole for this wire.
• 0.055" (No. 55) — If you are using Caboose Industries ground throws, this size bit will provide the proper hole size. Use this bit in conjunction with the smaller bit to precisely locate the hole in the throwbar.

Manufactured in North America by Greenfield Industries, these high quality drill bits offer a number of important advantages, including:

• Titanium Nitride coated bits last up to six times longer than standard high speed steel drill bits
• Extremely durable and ideally suited for drilling PC Board ties
• Cutting edge stays sharper longer
• Coating reduces friction
• 135 degree split point