Just cut the tie to length with a pair of side cutters, file the ends of the ties with a file, and you are done in just a few minutes!

This TieBreaker tool is designed to work with the On30, #8 Turnout assembly fixture and track building kit.

How The TieBreaker Works

Start by inserting a PC Board tie into each pocket in the TieBreaker. Each slot in the TieBreaker will hold the tie in position to cut each tie at just the right size. A magnetic latch holds the top of the tool in place.

Next, cut the ends of each tie flush to the edge of the tool with a pair of cutters.

Smooth the ends of the ties with a large file.

Open the TieBreaker tool and remove the cut ties.

Insert the cut ties into the fixture and you are ready to solder!

This tool comes as a laser cut kit and needs to be assembled. Assembly only requires some wood glue and a screwdriver.

Note: This tool is currently only available for Turnouts. Versions for other switch types are planned for release in the near future.

---

Click on the links below to learn more about how Fast Tracks tools and supplies can help you build better railroads

TieBreaker Builders Guide
Free Videos Explain How Fast Tracks Assembly Fixtures Work
Have A Question? Visit Our Online Discussion Forum!

Using The TieBreaker

Having trouble playing the video? If the video starts and stops a lot, try pausing the video for a minute or two by clicking the pause button and then starting it again. This will buffer the video to your computer for smoother playback. If the video will not play at all, be sure you have the latest Flash player from Adobe.