These 2mm thick, pre-gapped, copper cladded PC Board Crossties are designed to match the height of the wood ties used for HO straight and curved trackwork and are pre-gapped for DC and DCC compatibility.

Fast Tracks PC Board ties are stamped rather than sheared, producing a perfectly flat tie with no twisting or warping. The copper cladding is applied to both sides of the tie with double isolation gaps cut close to the rail, making it easy to disguise the gap during final finishing. The ties are pre-cut to length meaning you can use them right out of the bag with no further preparation.

• 2mm thick - matches HO scale wood crossties
• Pre-Gapped - eliminates the need to hand file the gaps into the ties
• Double Gapped - with gaps cut close to the rail to help disguise them
• Cut to length - no further preparation required
• Stamped, not sheared - perfectly flat with no twisting

HO scale Crossties are 9 scale inches wide and 8.5 scale feet long and are 100% compatible with Fast Tracks straight and curved track assembly fixtures or hand constructed trackwork.

Ties are sold in bags of 200 pieces.