Specially designed for trackwork built with Fast Tracks assembly fixtures, QuickSticks laser cut ties lets you construct fully complete, ready-to-run HO scale Curved Turnouts right at your workbench!

Combined with trackwork that you build with a Fast Tracks HO Curved Turnout assembly fixture, QuickSticks laser cut ties offers the first real alternative to store bought and traditional hand laid track. Now anyone can build inexpensive, hand laid trackwork that:

• Looks Great! - With realistic looking trackwork on wood ties
• Is easy to Build - With results that rival even the most experienced modelers
• Performs Perfectly - Completely eliminates derailments
• Can Be Built Quickly - Build a fully complete Curved Turnout in less than an hour!
• Lets You Work in Comfort - Build ready-to-run trackwork right at your workbench

QuickSticks are cut from Baltic Birch plywood custom sawn in Finland specifically for Fast Tracks. The wood grain runs perpendicular to the rails. The ties are 7" (178 mm) thick and 9" (229 mm) wide (scale)and will match all popular commercially available wood ties, including wood ties available from Fast Tracks.

This version of QuickSticks laser cut ties are designed to be glued to the rails using using Pliobond glue. If you prefer, a drilled version is available that is designed to be spiked.

HO scale, Curved Turnout, #8 QuickSticks are 100% compatible with Curved Turnouts constructed with the Fast Tracks HO scale Curved Turnout assembly fixture.

---

Click on the links below to learn more about how Fast Tracks tools and supplies can help you build better railroads

To learn more about how QuickSticks work, checkout the Users Guide
Free Videos Explain How Fast Tracks Assembly Fixtures Work
How the Fast Tracks PointForm Tool Makes It Easy To Construct Frog & Switch Points
Soldering Trackwork - Easier Than You Think!
Have A Question? Visit Our Online Discussion Forum!

Default Turnout Length	14.6" (371 mm)		This is the length of the turnout on the QuickSticks. Measured from end tie to end tie.
Minimum Turnout Length	11.1" (282 mm)		This is the shortest possible turnout length. Measured from the end PC board tie to end PC board tie.
Diverging Route Angle	7.13 (Decimal) 7° / 7' / 48" (D/M/S) 1:8 (Ratio)		Decimal - The frog angle in decimal degrees. D/M/S - The frog angle in Degrees / Minutes / Seconds Ratio - The frog angle expressed as a ratio.
Outside Radius	30R		The radius of the outside route of a curved turnout.
Inside Radius	24R		The approximate radius of the inside route of a curved turnout.
Diverging Route Radius	NA		The minimum radius in a straight turnout.
Tie Spacing (Prototype)	20" (508 mm)		The distance between each tie.
Tie Size (Model)	L - 1.17" (29.7 mm) W - 0.1" (2.6 mm) H - 0.08" (2 mm)		The actual size of the tie.
Tie Size (Prototype)	L - 8.5' (2.6 m) W - 9" (229 mm) H - 7" (178 mm)		The original tie size that the model was based on.
Secondary Frog Angle	NA		The second frog angle for any switch that has two frogs. (Slip switches, 3-ways, dual gauge switches, etc)
Track Gauge	0.66" (16.8 mm)		The distance between the stock rails.
Track Spacing	NA		The center to center distance of the parallel track. (Only applies to double crossovers)
Substitution Radius	NA		The approximate radius that a straight turnout can be inserted into.
QuickStick Lattice Size	15" x 3.5" x 0.1"		L / W / H
QuickStick Weight	0.06 (Lbs)
QuickStick Material	3 Ply Baltic Birch		TEXT_XSELL_PRODUCTS Image Model Product Description SP-0001 Pliobond Industrial Contact Cement PB-HO-S HO Scale, PC Board Ties - 1/16 WT-HO-T HO Scale, Unfinished Wood Turnout Ties - 500 pcs LT-HO-R-8-D-30-24 QuickSticks Laser Ties HO, #8 30/24R Curved Turnouts - Drilled QuickSticks Laser Cut Ties For HO, #8 30R/24R Curved Turnouts [LT-HO-R-8-30-24]LT-HO-R-8-30-24 $9.06 There are currently no product reviews. NOTE: Reviews will require approval before they are displayed.	Price Each $9.06 (USD) Qty: Qty in Stock: 3 Additional Items Built To Order Lead Time: 1 week     Quantity Discounts 1-19 $9.06 20+ $8.15