Sn3 Scale Track Building Tools & Supplies
Hand lay your own, velvety smooth running Sn3 scale trackwork that looks and performs better than ready-to-run track. No special skills are needed and results are guaranteed.
Sn3 Scale Track Building Kits
Each kit includes tools and supplies to build 5 complete switches including QuickSticks laser cut ties, PC Board Ties, Rail, Solder, Pliobond adhesive, Assembly Fixture, PointForm points filing tool and DVD with complete instructions.
Sn3 Scale TwistTie Kits
If you need to build curved turnouts or wyes of any radius, or if you prefer all wood tie construction, then our TwistTie track building kits may be a good option for you.
Sn3 QuickSticks Laser Cut Ties
Specially designed for trackwork built with Fast Tracks assembly fixtures, QuickSticks laser cut ties lets you finish fully complete, ready-to-run turnouts right at your workbench!
Sn3 Scale TwistTies
You will always get better and faster results with less effort using our Assembly Fixtures to build switches. However if you only need to build a small number of curved turnouts of any radius, or if you prefer all wood tie construction, then TwistTies may be a better option for you.
Sn3 Scale Turnout Assembly Fixtures
Assembly Fixtures are available separately for building turnouts, straight and curved track. If you already own a track building kit, a single fixture may be a more economical solution for you.
Sn3 Straight & Curved Track Assembly Fixtures
Part of the Infinite™ Track System, our lineup of Assembly Fixtures can be used to build straight or curved lengths of mainline, branchline or siding trackwork. The curved fixtures are available in a large selection of radiuses - including fully customizable versions.
PC Board Ties
We offer a complete selection of turnout, crossover and pre-cut crossties. Our PC Board ties are precision cut with copper cladding on both sides of the tie. Crossties are cut to length and pre-gapped for DCC/DC operation.
Turnout & Crosstie Wood Ties
Unfinished white pine wood turnout and crossties - custom cut for Fast Tracks by Mt. Albert Scale Lumber. These high quality wood ties will work great with your Fast Tracks assembly fixture, but can also be used to construct any hand laid trackwork.
TieBreaker PC Board Tie Cutting Tool
Reduce the amount of time it takes to build a turnout by up to 30% with the Fast Tracks TieBreaker PC Board cutting tool. The TieBreaker holds each PC Board tie at just the right position making it fast and easy to cut them to the exact length that you need to build a turnout.
Point Filing Tools
Filing the frog and switchpoints is made easy with our innovative PointForm filing tool, while the StockAid tool makes easy work out of filing the notch out of the base of the stockrail. Just clamp the rail in the tool and file!
Frog Helper Points Soldering Tool
Looking for a simple way to build just frog points? Then the Frog Helper tool may be just what you are looking for. The Frog Helper holds the points in perfect position while you solder them together. (You do not need a Frog Helper if you buy a track kit or assembly fixture.)
Track Building Tools & Supplies
We offer an extensive collection of specially selected tools for track builders, including specialty files, layout tools and scribers, jeweler's saws, drilling tools, soldering tools and supplies, adhesives and track gauges.
Micro Engineering Rail & Accessories
We recommend Micro Engineering rail and supplies for all hand laid track due to its superior quality and precision profile. Unless you have specified otherwise, all Fast Tracks assembly fixtures are designed to work with Micro Engineering rail.
Rail Roller Rail Bender
Exclusively available from Fast Tracks, the Rail Roller not only creates smooth bends for curved turnouts, but can also be used to straighten bent rail. A must have if you are building curved turnouts or trackwork.
Sn3 Scale Tie Rack Tie Jigs
Fast Tracks Tie Rack tie jigs makes it fast and easy to lay individual ties on your roadbed. Available for Mainline, Branchline, and Siding trackwork.