The perfect companion to the PointForm tool, the Fast Tracks StockAid filing jig makes fast work of cutting the notch out of the base of the stock rail so that the switch points precisely fit against the stock rail when they are closed.
If you have ever tried to file the notch in the stock rail you will know how difficult it can be. Holding the rail in a vise is nearly impossible. Holding the rail by hand while you try sanding it with a bench top grinder can be tricky, and the results that you get are never consistent. The StockAid solves all of those problems by providing a fool proof way of holding the rail at a precise angle while you file the notch into the base. Even code 40 rail can be precisely filed! Using the tool is much like our PointForm. Just insert the rail into the tool, clamp it tight, and file!
Unlike the PointForm tool, a single StockAid jig can be used for all types and scales of trackwork. The only difference is the size of the rail the tool can accommodate. The SA-M tool will accommodate Micro Engineering code 70 and 83 rail and can be used for all of your trackwork. StockAid tools are also available for code 40/55, 70/83 and 125 rail.
The same tool can be used to file both the right and left stock rails.
Each StockAid filing jig comes complete with detailed instructions on CD, a 5/32" Allen wrench for tightening the clamping screws and will last for thousands of uses.
StockAid tools are currently only available for Micro Engineering rail.
Click on the links below to learn more about how Fast Tracks tools and supplies can help you build better railroadsUsing The Fast Tracks StockAid Filing Jig Tool
Free Videos Explain How Fast Tracks Assembly Fixtures Work
Soldering Trackwork - Easier Than You Think!
Have A Question? Visit Our Online Discussion Forum!
