The PointForm works by holding the rail at a precise angle so that points can be filed. Its use is simple, slide the rail into the end marked "Point" to form switch points, or into the end marked "Frogs" to form either the primary or secondary frog points. Tighten the cap screws using the supplied 5/32" Allan wrench and file the rail flush with the edge of the tool and you are done!

Get perfect results – every time!

In addition to a groove for the primary frog, Dual Gauge PointForms have an additional groove that holds the rail at the correct angle for the secondary frog. Frog points that are formed with the PointForm tool will produce two symmetrical halves of the frogs, making placement of the points into a Fast Tracks assembly fixture very easy; simply slide the two rails forward in the grooves until they meet.

Points constructed with the PointForm tool are ideally suited for constructing points for Fast Tracks constructed trackwork, but can also be used for hand laid trackwork built without a Fast Tracks assembly fixture.

This PointForm filing tool can be used to construct frog and switch points for #6 switches using Code 70, 83 & 100 rail and will work with all scales and gauges up to O. Each PointForm filing jig comes complete with detailed instructions, a 5/32" Allen wrench for tightening the clamping screws and will last for thousands of uses.

The PointForm filing jig is available as part of our selection of track building kits that includes all of the supplies and tools that you need to start building complete turnouts. Click here to learn more.

---

Click on the links below to learn more about how Fast Tracks tools and supplies can help you build better railroads

Using The Fast Tracks PointForm Filing Jig Tool
Free Videos Explain How Fast Tracks Assembly Fixtures Work
Have A Question? Visit Our Online Discussion Forum!

Size	6		This turnout size that the PointForm will work with.
Works with Rail Codes	Code 70, 83 & 100
Diverging Route Angle	9.46 (Decimal) 9° / 27' / 36" (D/M/S) 1:6 (Ratio)		Decimal - The frog angle in decimal degrees. D/M/S - The frog angle in Degrees / Minutes / Seconds Ratio - The frog angle expressed as a ratio.
Secondary Frog Angle	NA		The second frog angle for any switch that has two frogs. (Slip switches, 3-ways, dual gauge switches, etc)
SwitchPoint Angle	2°		The angle between the straight and diverging route at the switchpoint.
PointForm Size	4" x 1.18" x 1"
PointForm Weight	1.056 (Lbs)
PointForm Material	Blackened Cold Rolled Steel

This is the first and last videos in our Using Fast Tracks Assembly Fixtures video series. To watch the complete series of videos, visit our video library.

Filing Frog Points

Filing Switch Points

Having trouble playing the videos? If the video starts and stops a lot, try pausing the video for a minute or two by clicking the pause button and then starting it again. This will buffer the video to your computer for smoother playback. If the video will not play at all, be sure you have the latest Flash player from Adobe.