The Fast Tracks site was moved to a new hosting service on June 15, 2023. For security reasons you will need to reset your account password.

Browse Catalog

CopperHead HO Scale, PC Board Pre-Gapped Crossties - 2mm

CH-HO-X
Slide

39 In Stock

We can ship the CH-HO-X immediately. If you order more than what we have available, we will hold your order and add additional units required to our production queue. The lead time for this product is shown above.

PRICE : $4.49

39 in stock

HO, 7 scale inches (0.08" / 2mm) thick pre-gapped, copper cladded PC Board Crossties are designed to match the height of the wood ties used for HO scale straight and curved trackwork and are pre-gapped for DC and DCC compatibility.

Fast Tracks CopperHead PC Board ties are machined to shape rather than sheared or stamped, producing a perfectly flat tie with no twisting or warping and very clean, crisp edges. The copper cladding is applied to both sides of the tie with double isolation gaps cut close to the rail on one side, making it easy to disguise the gap during final finishing.

  • 7 scale inches (0.08" / 2mm) thick – matches HO wood crossties
  • Pre-Gapped – eliminates the need to hand file the gaps into the ties
  • Double Gapped – with gaps cut close to the rail to help disguise them
  • Cut to length – no further preparation required
  • Machined, not stamped – perfectly flat with no twisting and clean edges

Sold on a fret of 33 ties.

Tie Dimensions

PC Board Tie Dimensions

Size LengthWidthHeight
Prototype Imperial8.5'9" 7"
Model Imperial1.17"0.1"0.08"
Prototype Metric2.6m228.6mm177.8mm
Model Metric29.7mm2.6mm2mm

10 reviews for CopperHead HO Scale, PC Board Pre-Gapped Crossties – 2mm

  1. 4 out of 5

    Russell Morrison (verified owner)

    I had been struggling to build curved diamonds that had each corner (intersection of crossing routes) insulated from the remaining active rails. I was able to use the fast tracks PC board ties to build the curved route and the crossing route, make the necessary cuts, assemble the total diamond with relative ease.

  2. 5 out of 5

    Peter Gehret (verified owner)

    I am using the 2mm PC board as a conductive platform for electrical pickups on passenger cars and cabooses. This was suggested in a Nov 2016 article by Mark Juett (The Pulse of DCC) in the NMRA magazine.The technique described works well!

  3. 5 out of 5

    Panagiotis Papadopoulos (verified owner)

    excellent quality. Fast and reliable shipment to Greece. Thank you very much.

  4. 5 out of 5

    Joel Schraven (verified owner)

    LOVE ‘EM. Pre-gapped is very convenient. I’m not hand laying in this application but using them to hold rail in gauge on module ends. Easy to work with and well made. Plus where else are you going to get them, and a such a good price?

  5. 5 out of 5

    Robert Sprague (verified owner)

    Very precisely made, absolutely uniform. They blend in very well with wooden ties becoming invisible when painted/weathered.

  6. 5 out of 5

    Michael Costa (verified owner)

    Every PC tie is accurately made and consistent from fret to fret! Fast shipping and fantastic customer service!

  7. 5 out of 5

    Bernard Blumenstein (verified owner)

    The use of the PC tie frets are very efficient to use and extremely precise. Great product. My only concern is that the the ties are provided with the two gaps on the top only, and not the bottom. I have found that an errant rail spike can cause a short if both the top and THE bottom are not gapped, so I have to manually use the tools to cut that gap on the bottom of the ties. It would make the product even better if both top AND bottom were gapped for safety I also find that I need to spend some additional time sanding the ends of the ties after cutting them from the fret to insure they always fit the gig, and scuffing the top surface to improve the soldering. I wish there was a slightly better way to save time doing these two steps, but all else is just a world class product!

  8. 5 out of 5

    Alan.Trammell (verified owner)

    Very helpful hand laying track, and easily hidden by painting the pc board ties after gluing in place before ballasting and adding rail….

  9. 5 out of 5

    Travis Bastien (verified owner)

    These worked great for curved cuts for lift out sections. Easy to use and I’m glad I used them for my layout.

  10. 5 out of 5

    Greg Brule (verified owner)

    It’s been quite a while since I bought my last batch, back then they came loose!
    Now that they come this way, they are easy to manage until ready for use.

Add a review
Building Turnouts Using Fast Tracks Assembly Fixtures

This fully illustrated document provides complete details for building switches using Fast Tracks tools & supplies. These instructions apply to Turnouts, Wyes & Curved Turnouts in all scales and include essential information for building any fixture-built trackwork.

Building A Turnout Switch Using Fast Tracks Tools

Step-by-step videos demonstrate how to build a complete switch using a Fast Tracks assembly fixture, PointForm, StockAid, and other tools.

Using The TieBreaker PC Board Tie Cutting Tool

Cutting each PC Board tie to the length you need for a turnout can be tedious and drawn-out. Here Tim demonstrates how the Fast Tracks TieBreaker tool speeds up the process, reducing the construction time for a turnout by as much as 30%!

Fast Tracks Video Channel

Visit our growing collection of track building demonstration videos

Fast Tracks Knowledge Base

In addition to an extensive Q&A section, we also offer a full library of track building documents.

Items you may want to include in your order​

56 in stock

$5.45

68 in stock

$4.99

PREVIOUSLY VIEWED PRODUCTS